Answer for Exterior paint and primer suggestions.

After preparing the stucco, use a Sherwin Williams Masonry Acrylic Primer… then top coat with Sherwin Williams A-100 (use a FLAT Finish for stucco)…

Clean off the rust on your iron work, using steel wool, then spot prime it LOCALLY with an Exterior Oil Base Primer where you had rust… then finish coat all with an Exterior Oil Base Paint (use a semi gloss or satin finish for iron, NOT Flat)… [using "enamel" is not required or advised here… ie the term "enamel" simply means paint that hardens to a higher degree than regular paint… used for other applications but not for iron work here] For best results always use Sherwin Williams Products… Good Luck!

  • By MagicDave
  • Comments closed
  • Categories