Answer for Restain Front Door

Not easy but doable.

First you will need to use a paint/varnish stripper that is safe for fiberglass. Chances are not every bit of stain will be removed from the wood grained areas. This is fine as you will need to use a gel stain to restain your door. The gel stain will add color and depth. Once it is applied and fully dry (24 hours) you will need to protect it with a clear coat.

  • By crowderpainting
  • Comments closed
  • Categories

Answer for Restain Front Door

Fiberglass Door

How do I strip and restain a fiberglass door?

  • By Anonymous
  • Comments closed
  • Categories

Answer for Restain Front Door

If the door is unfinished (no clear coat) your son can sand through the stain to remove it. This depends on the stain and the type of wood. The stain must be removed before restaining and sanding can be a great alternative to using a stripper. Try this on a section of the door and see how it goes.

If straight sanding is to much work, use a strong paint stripper, wash the door and allow to dry then do some sanding to finish up the prep.

  • By crowderpainting
  • Comments closed
  • Categories