Answer for Sanded Fiberglass Door

If the scuffs are in the first top coat and the stain was not removed under the clear coat you are fine. Be sure to wipe the cloudy coating off the door that came from sanding the first top coat and then apply the next coat. If the scuffs are in the stain and to the fiberglass you might have sanded to much??

  • By Anonymous
  • Comments closed
  • Categories

Answer for Sanded Fiberglass Door

The scuff marks might be in the fiberglass. If this is the case there isn't anything that you can do. If they are not into the fiberglass then applying the stain will cover them up.

Try applying a little stain to the affected areas, making sure to blend them into the surrounding area so they don't show. If this works, allow the stain spots to dry then apply apply another clear coat over the entire door.

  • By crowderpainting
  • Comments closed
  • Categories