I painted my fiberglass door with acrylic paint, giving it more than on coat. With the super hot temperatures, the paint bubbled in different places. The paint store recommended I sand over the areas affected, then paint the door with an oil based paint as a primer. Wait at least 24 hours then paint it with the acrylic paint once again.
Could you advise me if this is what needs to be done?
1 Answers
What brand of Paint did you use? Not very good I suspect… and did you PRIME the door first? No, I suspect… so now, sand it down to a relatively smooth paint surface… prime it with a Pigmented Shellac Sealer Primer (or if an exterior door, use an oil base exterior stain sealer)… then use a better brand of paint for the topcoat…
